930i Ground Integrity Analyzer

At Vitrek we believe that your investment in safety compliance test equipment is an extremely important one. We realize that today's test professional is constantly faced with changing test requirements and that is why we build versatility into each test instrument we manufacture.

The 930i Ground Integrity Analyzer is a case in point - the output current is fully user selectable from 3 to 30 amperes. So whether you're testing to a UL specification at 25 amps today or an IEC specification at 30 amps tomorrow, you can be sure that the Vitrek 930i will stand up to the test for years to come.

In fact, all test parameters of the 930i are fully programmable - output current and frequency, minimum and maximum resistance limits and test duration. And whether you're running the 930i from its nonvolatile test database or via computer control - ground bond testing has never been simpler or faster. The unit's password protected test database editor provides for quick and easy modification of existing tests, yet offers the security and integrity by demanding ISO 9000 quality systems.

Seamless Test Integration

The 930i is designed to work hand-in-hand with Vitrek hipot testers so that dielectric testing and ground bond testing can be accomplished from a single test set up. The results are automatically integrated into a unified test report with overall pass/fail status as well as step-by-step results with final values.
Features / Benefits
  • 3 to 30 Amp Test Current - meets a wide variety of regulatory test specifications
  • Password Protected Test Routine Storage
  • Frequency Synthesis 50-400Hz
  • 10mW Measurement Resolution - more measurement confidence and repeatability
  • 4 -wire Kelvin Sensing - eliminates lead resistance errors
  • Fully Programmable via front panel, hipot or computer control
  • Hipot and Ground Test from one set-up
  • High Speed Test throughout with actual measurement values
  • Display Prompted Setup - easy to use, fully adjustable
  • CE Mark Certified to EN61010
  • Made in the U.S.A.
  • 5 Year Extended Warranty

Specifications

Alternating Current Output

Range 3 to 30 amperes RMS, programmable
Resolution 1 amp
Output Frequency Sinewave synthesis, 50 Hz to 400Hz
Compliance Voltage 3 volts RMS
Regulation ?0.25% no load to full load

Resistance Measurement

Resistance Limit
User programmable max. and min.  Test is automatically aborted when limit is exceeded.
Resistance Range
1W at 3 amps linearly decreasing to 100 mW at 30A
Resistance Resolution
10mW
Measurement Accuracy
?1.0% of reading; ?0.5% of range
Accuracy
Specifications apply for 1 year, ?5蚓 from the cal temp within 20蚓 to 30蚓
Calibration Certificate of calibration traceable to the National Institute of Standards and Technology (NIST) provided
Test Time Digital count down timer, programmable 1 to 9999 seconds
Terminal Configuration True four-wire Kelvin

General Specifications

Remote Interface VICL and serial com standard.  PLC optional.
Display 40 character dot matrix illuminated liquid crystal display
Indicators L.E.D. status indicators
Alarm Audible and visual alarms provide pass/fail indication
Diagnostics Built-in self diagnostics test ROM, RAM and output system
Safety CE mark certified to EN61010
Accessories K-2, VIC-3, BBL-2 and operator's manual supplied with unit
Warranty Extended 5 year parts and labor with annual factory calibration and maintenance.  Standard warranty one year.
Operating Temperature 0蚓 to 50蚓
Humidity 90% RH 0蚓 to 40蚓
Power 115/230 VAC  ?10% 250 VA max
Dimensions 89mmH x 432mmW x 457mmD (3.5"H x 17"W x 18"D)
Weight 11Kg (24 lb.) Net/15Kg (34 lb.) Shipping